Manufacturer Model: | AP200-V2 |
Qmax Litres/Min | N/A |
Hmax (m): | N/A |
Voltage / Hertz: | 220V - 240V / 50Hz |
Power (KW): | 0.2 |
Horsepower (HP): | 0.25 |
Ampage: | 1.2 |
Curves: | N/A |
Speed (Revolutions / Minute: | N/A |
Power (Watts): | 200 |
Heater Power (Watts): | N/A |
Maximum Pressure (Mpa): | 0.006 |
Maximum Pressure: | 0.006 |
Air Volume (m3/min): | 0.8 |
Noise Level dB (A): | Less than 63 |
Jets Quantity (pieces): | Designed to be used with approximately 6 to 12 Jets (however this is not a blanket rule as different jets have different exit hole diameters) |
Recommended Water Depth (metres): | 0.3 |
Water Volume Heating Capacity (Gallons): | N/A |
Water Volume Heating Capacity (Litres): | N/A |
Fitting Size (mm): | N/A |
Weight (Kg): | 2 |
Length (mm): | 290 |
Width (mm): | 155 |
Height (Kg): | 175 |
Power Cable Length: | 1.5 Metres |
Pump Type: | Air Blower Pump |
Brands Used On: | |
Will ship to: | Worldwide |
Suitable For: | Hot Tubs (i.e. Jacuzzi) , Whirlpool Baths, Small Swimming Pools |
Certification: | CE, TUV |
Water Protection Grade: | Type F Insulation |
Thermal Protector: | TI.USA |
Important Information: | "The ""V2"" in this pump's code means that it has a two stage impellar" |
Other Information: | Please contact us for more information about 110V - 120V models before ordering. |
Di Vapor accepts the following payments methods:
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.