Manufacturer Model: | APW900-V1?with heater) |
Qmax Litres/Min | N/A |
Hmax (m): | N/A |
Voltage / Hertz: | 220V - 240V / 50Hz |
Power (KW): | 0.9 |
Horsepower (HP): | 1.2 |
Ampage: | N/A |
Curves: | N/A |
Speed (Revolutions / Minute: | N/A |
Power (Watts): | 900 |
Heater Power (Watts): | 180 |
Maximum Pressure (Mpa): | 0.024 |
Maximum Pressure: | 0.024 |
Air Volume (m3/min): | 5 |
Noise Level dB (A): | Less than 84 |
Jets Quantity (pieces): | Designed to be used with approximately 20 to 40 Jets (however this is not a blanket rule as different jets have different exit hole diameters) |
Recommended Water Depth (metres): | 1 |
Water Volume Heating Capacity (Gallons): | N/A |
Water Volume Heating Capacity (Litres): | N/A |
Fitting Size (mm): | N/A |
Weight (Kg): | 3.2 |
Length (mm): | 380 |
Width (mm): | 195 |
Height (Kg): | 210 |
Power Cable Length: | 1.5 Metres |
Pump Type: | Air Blower Pump With Heater |
Brands Used On: | |
Will ship to: | Worldwide |
Suitable For: | Hot Tubs (i.e. Jacuzzi) , Whirlpool Baths, Small Swimming Pools |
Certification: | CE, TUV |
Water Protection Grade: | Type F Insulation |
Thermal Protector: | TI.USA |
Important Information: | The V1 in this pump's code means that it has a single stage impellar, WH in the code means that this air blower pump has a heater |
Other Information: | Please contact us for more information about 110V - 120V models before ordering. |
Di Vapor accepts the following payments methods:
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.