Stuart Turner 46497 Monsoon Standard 2.0 Bar Single Water Pump for Showers, Bathrooms, Houses and Apartments
SUMMARY
Monsoon Standard 2.0 bar Single pumps are idealfor boosting a water supply in vented systems. Suitable forpositive head applications only.
Suitable for domestic use, Monsoon Standardpumps will function under positive head conditions and are suitablefor installation into open vented hot and cold water systems.
Monsoon Standard pumps require a flow of just0.6 l/min through the outlet to start.
Application
- Boost the water pressure in either the hot or cold water supplyin a positive head application.
- Boost the blended water outlet between the shower valve and theshower rose.
Technical Specification
| General | |
| Product code | 46497 |
| Guarantee | 5 years |
| WRAS approval | 1404702 |
| Features | |
| Pump type | Peripheral |
| Mechanical seal | EPDM / PTFE / Al. Oxide |
| Anti vibration feet | |
| Inlet strainer(s) | |
| Flexible hoses | 2 |
| Dry run protection | |
| Materials | |
| Pump body | Brass |
| Impeller | Brass |
| Performance | |
| Maximum head (closed valve) | 2.0 bar |
| Performance @ 9 l/min | 1.5 bar |
| Performance @ 18 l/min | 0.7 bar |
| Maximum flow | 27 l/min |
| Maximum static inlet pressure | 14 metres |
| Maximum working pressure* | 600 kPa (6 bar) |
| Maximum ambient air temperature | 40 °C |
| Min / Max water temperature** | Min 4 °C / Max 65 °C |
| Flow switch sensitivity (approx) | 0.6 l/min |
| Connections | |
| Pump connections | G ¾ male |
| Flexible hoses | |
| Connections (UK model) | G ¾ female x 22 mm push-in 300 mm long Isolating valves on all hoses |
| Connections (ROI model) | G ¾ female x 21 mm push-in 300 mm long Isolating valves on all hoses |
| Connections (Export model) | G ¾ female x G ¾ female 300 mm long |
| Motor | |
| Type | Induction, auto-reset thermal trip |
| Duty rating | Continuous (S1) @ 9 l/min and above |
| Electrical | |
| Power supply/phase/frequency | 230 V a.c./ 1 / 50 Hz |
| Current (full load) | 1.1 Amps |
| Power consumption | 245 Watts |
| Fuse rating | 5 Amps |
| Power cable (pre-wired) | 1.5 metres |
| Physical | |
| Enclosure protection | IPX4 |
| Length | 200 mm |
| Width | 126 mm |
| Height (excluding hoses) | 202 mm |
| Weight (including fittings) | 5.4 Kg |
* The maximum pressure that can be applied to the pump under anyinstallation conditions.
** A stored water temperature of 60 °C is considered sufficientto meet all normal requirements and will minimise deposition ofscale in hard water areas.
FAST DELIVERY
- Delivery of this item is priced as a 'medium' packet. UK delivery costs £9.95.
- This item will be dispatched from our UK warehouse in approximately 3 days. If you need this item urgently then please contact our office for availability.
- We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.
RETURNS
- If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
- For more information please see our terms and conditions.
Payment Methods
Di Vapor accepts the following payments methods:
- Visa
- Mastercard
- Paypal
- Maestro
- American Express (via PayPal guest checkout only)
- Cheque (must be cleared before dispatch)
- BACS
SECURITY
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.