Stuart Turner 46532 Showermate Universal 1.8 bar Twin Shower Pump
SUMMARY
Showermate Universal Twin pumps are designed toboost the incoming hot and cold water supply to a shower, bath,shower mixer or mixer tap. Suitable for both positive andnegative head applications.
Suitable for domestic use only, ShowermateUniversal pumps are suitable for installation into openvented hot and cold water systems.
Universal pumps do not require a gravity flowof water to start.
Application
- Boost hot and cold water supplies equally
- Suitable for single or multiple (up to 4) outlets within abathroom subject to correct specification and pump sizing
Technical Specification
| General | |
| Product code | 46532 |
| Guarantee | 3 years |
| WRAS approval | 1212078 |
| Features | |
| Pump type | Peripheral |
| Mechanical seal | EPDM / PTFE/ Al. Oxide |
| Anti vibration feet | |
| Flexible hoses | 4 |
| Run on timer | 3 sec |
| Dry run protection | |
| Materials | |
| Pump body | Plastic |
| Impeller | Plastic |
| Performance | |
| Maximum head (closed valve) | 1.8 bar |
| Performance @ 9 l/min | 1.4 bar |
| Performance @ 18 l/min | 0.8 bar |
| Maximum flow | 33 l/min |
| Maximum static inlet pressure | 6 metres |
| Maximum static outlet pressure | 6 metres |
| Maximum working pressure* | 380 kPa (3.8 bar) |
| Maximum ambient air temperature | 40 °C |
| Min / Max water temperature** | Min 4 °C / Max 65 °C |
| Flow switch sensitivity (approx) | 0.8 l/min |
| Pressure vessel air pre-charge | 1.5 bar (21.75 psi) |
| Connections | |
| Pump connections | G ¾ male |
| Flexible hoses | |
| Connections | G ¾ female x 15 mm push-in 200 mm long Isolating valves on inlet hoses |
| Motor | |
| Type | Induction, auto-reset thermal trip |
| Duty rating | Continuous (S1) @ 9 l/min and above*** |
| Electrical | |
| Power supply/phase/frequency | 230 V a.c./ 1 / 50 Hz |
| Current (full load) | 1.9 Amps |
| Power consumption | 440 Watts |
| Fuse rating | 5 Amps |
| Power cable (pre-wired) | 1.5 metres |
| Physical | |
| Enclosure protection | IP22 |
| Length | 305 mm |
| Width | 139 mm |
| Height (excluding hoses) | 338 mm |
| Weight (including fittings) | 5.6 Kg |
* The maximum pressure that can be applied to the pump under anyinstallation conditions.
** A stored water temperature of 60 °C is considered sufficientto meet all normal requirements and will minimise deposition ofscale in hard water areas.
*** Both heads pumping 4.5 l/min and above.
FAST DELIVERY
- Delivery of this item is priced as a 'medium' packet. UK delivery costs £9.95.
- This item will be dispatched from our UK warehouse in approximately 3 days. If you need this item urgently then please contact our office for availability.
- We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.
RETURNS
- If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
- For more information please see our terms and conditions.
Payment Methods
Di Vapor accepts the following payments methods:
- Visa
- Mastercard
- Paypal
- Maestro
- American Express (via PayPal guest checkout only)
- Cheque (must be cleared before dispatch)
- BACS
SECURITY
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.