Aquariss ALV924/2 Encounter Thermostatic Shower Cartridge

SUMMARY

Aquariss ALV924/2 Encounter Thermostatic Shower Cartridge

Know Your Shower Spares: Aquariss Thermostatic Cartridge ALV924/2

Aquariss shower valves that display problems such as poor rate of water flow and difficulties in temperature adjustment may require a replacement thermostatic cartridge. These problems are quite common, especially in areas where hard water levels are high. This guide will help you empirically determine if the Aquariss ALV924/2 thermostatic cartridge is the spare part for the shower you have to repair.

You can contact us if you need to verify or need any assistance in determining the shower or tap spares you need. You can also chat with Di Vapor’s very friendly and helpful spares experts via WhatsApp 07754 173340. We are happy to help with your spares needs!

One of the first things that come to mind when the shower begins to have issues is whether to replace the Aquariss ALV924/2 thermostatic cartridge. The valve and thermostatic cartridge can be checked for clogs if the rate of water flow is less than satisfactory. A time-worn shower cartridge can cause temperature regulation problems.

Cartridge dimensions (1) and the year the valve was manufactured (2) can help you identify if this Aquariss thermostatic cartridge is what the shower valve needs.

1. Cartridge dimensions can establish whether the Aquariss ALV924/2 thermostatic shower cartridge is suitable with the shower model you have. This is because the handle will not reassemble right if the replacement cartridge is too long (or short) for the valve. And for that same reason, the number of spline teeth on your cartridge must be the same as this shower spare.

A ruler can be used to take the measurements of the faulty cartridge and compare it with these measurements. In taking the spline teeth count of the cartridge it will be helpful to mark the beginning point with a pen and then counting from there.

Measurements of Aquariss ALV924/2 thermostatic cartridge:
Total Length (excluding wax thermostat): 96mm
Diameter at Thread: 41.7mm

Top Spline Diameter: 7.6mm
Top Spline Teeth / Notches: 20
Stop Ring Spline Diameter: 20mm

Diameter at Top O'ring: 40.5mm
Diameter at Middle O'ring: 40mm
Diameter at Bottom O'ring: 39.6mm

2. Sometimes Aquariss shower valves can have the same model number but require different thermostatic cartridges. Knowing the year the shower valve is manufactured can be helpful. But if in doubt, you can always contact us and we will personally search for the spare part you need.
(Our contact details are given in the subheading above.)


The Aquariss ALV924/2 thermostatic cartridge will be shipped out on the same business day (M-F) for purchases made before 3:00 PM.


Di Vapor supplies an array of spares:
+ Shower Door Rollers
+ Shower Door Seals

+ Hot Tub Water Pumps
+ Hot Tub Water Heaters

+ Kitchen Tap Cartridges
+ Bath and Basin Mixer Cartridges

FAST DELIVERY

• Delivery of this item is priced as a 'small' packet. UK delivery costs £5.95.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.30pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.