SUMMARY

Carron Phoenix Dante Pro Tap Cartridge Cold - 28 Spline, 1/2" Inch 133.0438.152 Compatible Tap Valve

Measurements and Other Information: Carron Phoenix Dante Pro Tap Cartridge Compatible Cold Valve (133.0438.152)

Measurements:
Total length (from top to bottom of cartridge): 53.8mm (5.38cm)
Diameter at widest part: 23.8mm (2.38cm)
Diameter of spline: 7.8mm
Spline teeth count: 28

Other information:
Bottom seal colour: Blue (Cold)
Close and open direction: Clockwise close (Anti-clockwise open)
Hot valve compatible cartridge: CP-1142
(Please visit the spare part page to see the cartridge fitting instructions and other FAQs.)
Original spare part number: 133.0438.152

The second to the last image in the gallery above is an illustration of the measurements of the Carron Phoenix Dante Pro compatible tap cartridge.


This tap spare part is compatible with many kitchen taps. If you have a different tap model and want to know if this cartridge can be used, please take its measurements and compare it with the measurement and information given above.

You can also send a message to our UK spares experts and they will assist you in finding the tap repair parts you need.

All tap repair supplies purchased during weekdays before 3:00 PM will be shipped out on the same day.

Tap Repair Tips Using the Carron Phoenix Dante Pro Tap Cartridge

This replacement tap cartridge for the Carron Phoenix Dante Pro is the spare part for taps that use the 133.0438.152 cold valve. Here are a few tips when it comes to fitting this tap valve part.

– Use an Allen key to loosen the grub screw and remove the valve handle.

– Corrosion and / or hardened limescale can cause the handle to get stuck in the valve making it difficult to remove. When the handle won’t come off, an extra amount of force can be used to separate it from the valve.

Hold the spout firmly in place before pulling out the handle.

– The hot and cold valve cannot be interchanged. Though the cartridge itself does not regulate water temperature, the close and open direction of the two valves are different. This Carron Phoenix Dante Pro tap cartridge 133.0438.152 replacement is the cold valve insert.

– Silicone-based plumbing grease must be applied to the lone O-ring of the replacement cartridge before putting it in the valve. This will help the 133.0438.152 compatible Carron Phoenix Dante Pro tap cartridge seal inside and it will protect the O-ring from abrasion.

We offer the perfect silicone grease that is formulated specifically for tap valve repair. This can be seen in the last section of the page.

– All things can wear out over years of use. The old cartridge can be kept as a future reference when that tap part needs to be replaced again.


Di Vapor carries many tap spare parts for your tap repair needs:
+ Carron Phoenix
+ Franke
+ Blanco
+ Abode

FAST DELIVERY

• Delivery of this item is priced as a 'small' packet. UK delivery costs £5.95.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.30pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.